Skip to content
CH 15 · Part B: Doing a real tender properly

How to count drawings with no legend, and scanned drawings

Count a drawing that has no legend, no layers and no labels. Point at one symbol, let TrueQty find every one like it, name the set, and add any it missed. A scan is counted by hand.

Who can do this
JuniorTeam leadAdmin

In this guide

  1. 01Point at one symbol
  2. 02Find every one like it
  3. 03Name the set once
  4. 04Add what it missed

Some drawings have no drawing layers, no labels and no legend: nothing on them says what their symbols are. TrueQty says so plainly, lists the drawing as Count by hand, and offers to build the legend with you.

Step by step

  1. Open the drawing, and confirm its details as usual, such as Security, floor layout, Level 4. See File a drawing.
  2. Click Open the drawing and point at a symbol.
  3. Click Point at a symbol, then click one device on the drawing, such as one camera. You can also drag a box around it: just the one symbol, with nothing touching it. To bring a symbol at the edge into view, hold Space and drag to move the drawing.
  4. Click Find every one like it. It searches for every symbol that looks the same. This usually takes a couple of minutes, and it keeps going if you leave the page.
  5. Name the set. Click Name this set and choose the type. That is the legend this drawing never came with, and every device in the set is counted, such as 38. If you named it wrongly, click Change name.
  6. Read the note in the panel. "Searched the area around the symbol you picked, not the whole sheet." Devices far from it may be missing.
  7. Add the ones it missed. If the riser says 40 cameras on this floor, two are missing. Click Add missed devices, or press A, choose the type, and click each device. Each one is marked as added by hand.
  8. Click Done adding.

Check it worked

Check each device type as usual, so a team lead can approve the drawing. Nothing here counts until the drawing is approved.

A scanned drawing

A scan is a picture, so TrueQty cannot read the devices on it. Its card says This is a scanned drawing. Click Start counting, choose a device type, and click each device on the drawing. TrueQty keeps the count. If you can get the PDF exported from the drawing software, click Add a PDF instead.

If nothing matches at all

You can always count it by hand. Click Count by hand, pick the type, and click each device.

Watch it done

Open on YouTube

The same steps, on the sample tender, in 1:41.

TrueQty Academy/CH 15/Drawings with no legend

Finished this guide?

Mark it done to track your way through the Academy.

Follow along on your own tender. Every guide works the same on a real drawing.

Start free trial