Skip to content
CH 12 · Part B: Doing a real tender properly

How TrueQty checks your count against the drawing's total

Many consultants print their own device total on the drawing. TrueQty checks its count against it, drawing by drawing and for the whole project, and tells you in one line.

Who can do this
JuniorTeam leadAdmin

In this guide

  1. 01The drawing's own total
  2. 02Amber or green
  3. 03Warns, never blocks
  4. 04The project total

What it checks

A drawing often prints its own total, such as "Total cameras: 73". TrueQty reads that figure and checks its own count against it. The result is one line above the drawing.

Colour Means What to do
Amber Close: "Close to the drawing's own total: found 72 cameras, the drawing says 73." Find the one missing or extra device before you approve
Amber Further apart: "Count differs from the drawing's own total" Find the missing or extra devices before you approve
Green A match: "Count matches the drawing's own total: 73 cameras" Nothing. The count agrees with the drawing

Step by step, when it is amber

  1. Read the notes on the device type. A type with a note says so in the list, such as 1 note to read, and the note often says why, such as a camera named but not drawn.
  2. Find the device. On Level 02 of the sample tender, a camera was labelled but never drawn.
  3. Add it by hand, or take out the extra. See Review a drawing.
  4. Watch the line turn green.

If the consultant's total is wrong

You can still approve the drawing. The check warns, it does not block: the line says "If the drawing's own total is wrong, you can still approve." Put the difference in your tender questions to the consultant.

The project total

Some drawings, such as a riser, print the whole project's total instead: "Total cameras: 213". The drawing says so: "This drawing prints the project's total. It is checked against all the drawings together, on the project page."

  • Before Level 04 was counted, the project page read, in amber: "TrueQty found 173 cameras. The drawings say 213." with the drawing that prints the figure, a link to open it, and "Check the cameras before pricing."
  • With Level 04 counted, it reads: "TrueQty found 213 cameras, and the drawings say 213." Every camera on the riser is on a plan.

Watch it done

Open on YouTube

The same steps, on the sample tender, in 1:43.

TrueQty Academy/CH 12/The count check

Finished this guide?

Mark it done to track your way through the Academy.

Follow along on your own tender. Every guide works the same on a real drawing.

Start free trial