Skip to content
CH 10 · Part B: Doing a real tender properly

How to file a drawing: system, drawing type, floor and scale

Tell TrueQty what a drawing is, so its counts are filed in the BOQ under the right system and floor. It proposes each value and says where it read it.

Who can do this
JuniorTeam leadAdmin

In this guide

  1. 01System
  2. 02What the drawing shows
  3. 03Floor
  4. 04Scale

Step by step

  1. Open a drawing. In the left panel, Drawing details says Please confirm until someone has checked them.
  2. Click Confirm drawing details. A panel opens from the side, with every field filled in from the drawing number and the title block.
  3. Read what it proposes. Under a field, TrueQty read: says what it found, and where, such as "TrueQty read: Level 03, from the drawing title".
  4. Check the drawing title. It is read straight from the title block.
  5. Check the system, such as Security.
  6. Check what this drawing shows: a Floor layout, a Schematic or riser, or a Technical room. A schematic or riser is kept as reference, not counted.
  7. Check the building or block, if the project has more than one, and the floor, such as Level 03, read from the drawing title.
  8. Check the scale, such as 1:100. If the drawing states no scale, leave it empty and the project scale is used.
  9. Click Confirm.

Check it worked

Drawing details now says Confirmed, with the details on one line, such as "Ground floor CCTV layout, Security, Floor layout, Level 03, Scale 1:100". The counts are filed in the BOQ under these details.

Why the scale matters

Cable lengths are measured on the drawing at its scale. A wrong scale makes every cable run on that drawing wrong, so check it against the title block or a dimension you can read. Saving a new scale says "Scale saved. Cable lengths updated."

Changing it later

Click Edit drawing details to change any field and click Save, or click Mark not confirmed to send the drawing back to be confirmed.

Watch it done

Open on YouTube

The same steps, on the sample tender, in 1:17.

TrueQty Academy/CH 10/File a drawing

Finished this guide?

Mark it done to track your way through the Academy.

Follow along on your own tender. Every guide works the same on a real drawing.

Start free trial