CH 04 · Part A: Your first priced proposal
What happens while TrueQty reads your drawings
What TrueQty does after you click Read drawings, and what is waiting for you when it is done: every drawing listed with its status, and the first check already run.
- Who can do this
- JuniorTeam leadAdmin
- Read first
- Video
- 0:54below the steps
In this guide
- 01Each drawing in turn
- 02Scans counted by hand
- 03The drawings list
- 04The first check
What happens, in order
- Each drawing is read in turn. Vector floor plans take seconds. Each file on Add drawings shows where it is, such as Waiting to be read.
- You can leave the page. Reading carries on without you.
- When reading is over, Add drawings says so: "All drawings read. Next: step 2, check and approve the counts." Click Go to step 2: Check and approve to open the first floor layout to check. At the top of every project page, the stage marked Next is where the work is, and You are here marks the page you are on.
- On the project page, every drawing is listed on the Drawings tab, with its status, the reason under it and one button for what to do next:
- Ready to check, with Check counts.
- Count by hand, for a scanned drawing ("A scanned drawing. TrueQty can't read scans.") or one with nothing on it that says what its symbols are. See Drawings with no legend.
- Reference only, for a riser or schematic. Its devices are counted on the floor layouts.
- Needs a PDF, for a DWG or DXF drawing with no PDF of it yet, with Add a PDF.
- The first check is already there. Where the drawings print their own totals, TrueQty compares them with what it found, in an amber line above the list, such as "TrueQty found 172 cameras. The drawings say 213." with a link to open the drawing that prints the figure.
- The stages at the top move on. Drawings is done, and Check and approve says how many floor layouts are approved, such as "Now: 0 of 6 floor layouts approved". The Next step card lists the drawings that need someone, each with its own button.
Reading the first check
On the sample tender, the riser says 213 cameras and the plans, so far, show 172. Two things explain the gap: Level 4 is a scan that still has to be counted, and one camera on Level 2 is missing.
Both get fixed before anything is priced. An amber check is not an error in TrueQty. It is TrueQty telling you where to look.
Next
Review a drawing. This is the heart of TrueQty.
Watch it done
Open on YouTubeThe same steps, on the sample tender, in 0:54.
Finished this guide?
Mark it done to track your way through the Academy.
